Application
Excellent for use in repairing broken lines or adding additional lines. Simply cut section of broken pipe slightly longer than compressed Quick-Fix, apply glue to fittings and expand Quick-Fix to fill the gap.
Specification
- Available in 15-150mm sizes.
- Rugged Hi-Impact PVC Sch 40 Type II construction.
- 1033kPa rated in all positions.
- Internal self-lubricating EPDM oʼring for long life and smooth movement.
- One piece cylinder – no solvent welds to leak
Application
Used in PVC Pipe networks carrying water.
Specifications
- PVC Type 1, Grade 1, Cell Class 12545-B
- EDPM – ‘O’ Ring Seal
- Pressure control ring – PVC
- Stainless Steel grip ring
- ACME Thread cap to body
- Maximum pressure – 1102kPa
- Stainless Steel collar
* Do not use on gas, oil and compressed air.
Application
Repair coupling used in PVC Pipe Networks carrying water.
Specifications
- Material – PVC Type 1, Grade 1, Cell Class 12545-B
- BYNA-N Seals – Double Width
- ACME Thread cap to body
- Maximum pressure – 1378kPa
* Do not use on gas, oil and compressed air.
Application
Used to allow the addition of a tee branch in PVC Pipe Network carrying water.
Specifications
- Material – PVC Type 1, Grade 1, Cell Class 12545-B
- BYNA-N Seals – Double Width
- ACME Thread cap to body
- Maximum pressure – 1378kPa
- 15mm to 50mm sizing
* Do not use on gas, oil and compressed air.
Application
Excellent for use in repairing broken lines or adding additional lines. Simply cut section of broken pipe slightly longer than compressed Flo Span, apply glue to fitting and expand Flo Span to fill the gap.
Specifications
- Double ‘O’ Ring design on expansion (EDPM)
- ACME Thread cap to body
- 1378kPa rated in all positions
- EDPM ‘O’ Ring on union end
- Body: PVC Type 1, Grade 1 material
- 15mm to 100mm sizing
* Do not use on gas, oil and compressed air.
Application
Designed for use for joining plastic piping systems, where frequent disassembly may be required. Suitability of application is at the discretion of the user.
Features
- Two piece design with rotating ring flange face
- Dual bolt hole pattern
- PVC construction
- No backing ring required
Specifications
- 80 – 250mm metric sizing
- Bolt hole pattern
- Suits BS10 Table D & E (Aust)
- Suits ANSI (USA)
- Suits DIN (Europe)
- PVC Cell classification 12454-B
- Maximum pressure 1033kPa at 22° Celcius
Application
Designed for use in joining plastic piping systems where frequent disassembly may be required. Suitability of application is at the discretion of the user.
Features
- Single body
- PVC construction, heavy body
- Table D drilling
Specifications
- 50 – 150mm metric sizing
- Bolt hole pattern AS/NZS 1477
- Maximum pressure 1033kPa at 25º Celcius
Description
Kwikcut is a Plastic Pipe and Hose Cutter designed to meet the needs of the professional.
Application
The rotating / rocking technique produces fast, easy cuts, together with being small and lightweight, saves hours of time and effort. It is ideally suited to a limited working space, the cutter adapts easily where a conventional hacksaw cannot be used. Kwikcut produces no cutting residue, eliminating deburring and the possibility of contaminating the pipe. This clean, smooth cut allows quick and easy connections for a neat, professional installation.
Features
- Replaceable high-carbon, Teflon coated steel blade.
- Blade closes into its own handle for safe carrying and handling.
- Tough, durable nylon handles.
- Tool pouch available.